Are you looking to change the IP address on your 1734-AENTR module? This blog post will guide you through the process step by step.
Step 1: Accessing the Module
First, you will need to access the 1734-AENTR module. This can be done by connecting to the module through your computer or laptop using an Ethernet cable.
Step 2: Logging In
Once you have accessed the module, you will need to log in using the default username and password. This information can usually be found in the module's user manual.
Step 3: Navigating to the IP Address Settings
After logging in, navigate to the IP address settings within the module's interface. Here, you will be able to see the current IP address and make changes as needed.
Step 4: Changing the IP Address
Enter the new IP address that you would like to assign to the module. Make sure to choose an IP address that is within the same subnet as your network to ensure proper connectivity.
Step 5: Saving the Changes
Once you have entered the new IP address, save the changes within the module's interface. This will apply the new IP address to the module and ensure that the changes take effect.
By following these steps, you can easily change the IP address on your 1734-AENTR module. Remember to always refer to the user manual for specific instructions related to your module.